Version Notes 

ROTALIGN PRO Shaft Alignment 3.15 to 3.16
ROTALIGN PRO Soft Foot 1.06 to 1.07
ROTALIGN PRO Program Manager 1.07 to 1.08

• Improved text editor
• Two new tolerance tables for cardan shaft
• True Resume function, opens last file in work
• Machine properties - split case pump picture added
• Page Up/Page Down soft keys in file select screens
• Special printer driver (Epson Rotacopy) for the PT Capture training program
• Language versions: Dutch, English (US, Brit.), German, Italian, Swedish, French, Spanish and Finnish

ROTALIGN PRO Shaft Alignment 3.12 to 3.15
ROTALIGN PRO Soft Foot 1.04 to 1.06
ROTALIGN PRO Program Manager 1.06 to 1.07

• Thermal growth values entered for Flange Machines are disregarded. (Entering thermal
  growth values for Flange Machines means that the values are entered for 4 Feet machines and
  then the machine type is changed to Flange Machine).
• In Soft Foot Measurement Mode, a Soft Key for clearing all measured values has been
  introduced.
• New Pump Type has been added.
• IMPORTANT: For Short Flex couplings, the offset target values for the left machine are
  reversed to match the PRÜFTECHNIK sign convention.
• Screen Dumps (Hard copies) should work from all screens except MOVE.
• In the screen for selecting material for TLC, the SELECT Soft Key has been replaced with the
  OK Soft Key.
• IMPORTANT: In the new versions you can work even when the main battery runs out of
  power (the system does not shut down). If the auxiliary battery is also out of power any
  unsaved data are stored in the static RAM of the ROTALIGN® PRO (like the old ROTALIGN®
  2.0x). When switching the system on the next time the Program Manager starts the program,
  which has saved the data to static RAM, automatically and this program reloads the data from
  the static ram.
• The printing area has been reduced by 1 inch (page length). A logical page should now fit on
  every printer page.
• In all screens with file lists the Soft Keys 2 and 5 are used for page up respectively page
  down.
• PC COMM can be started directly from the shaft alignment main menu.
• Resume now goes to last selected screen. Previous versions (from 3.10 on) always resumed
  into the dimensions screen.
• Ambient temperature, average value and inclinometer value are shown in XY View Screen
  even when the laser does NOT hit the sensor.
• When entering File Open or File Delete screen a file counter is shown. (The user thus knows
  that the system is thinking.)
• File Open and File Delete screens are now limited to a maximum of 300 files. If there are
  more than 250 files on the device a warning is shown.
• New text editor, mobile phone style. Download instructions: (31KB) protexteditor.pdf (Updated 12/6/99)
• In the File-Search-Screen the highlight is maintained when jumping to search
  criteria/location info/user info.
• Language versions: Dutch, English (US, British), German, Italian and Swedish.

Go to Alignment Reporter